top of page

PT-REQ10L

10,000 LUMENS

 

 

 

Projector type1-Chip DLPTM projector
Display methodDLPTM chip x 1, DLPTM projection system
Display Device -> Panel size0.8 in diagonal (16:10 aspect ratio)
Display Device -> Number of pixels2,304,000 (1920 x 1200 pixels)
Light sourceLaser diode
Light output *1 *2 *310,000 lm
Light output (ANSI) *410,000 lm
Light output (Center) *510,300 lm（Center）
Time until light output declines to 50 % -> NORMAL *620,000 hours [NORMAL]
Time until light output declines to 50 % -> ECO *624,000 hours [ECO]
Time until light output declines to 50 % -> QUIET *620,000 hours [QUIET]
Resolution4K (3840 x 2400 pixels) (Quad Pixel Drive: ON)
Contrast Ratio (typ.) *325,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal)70–700 inches (with supplied lens)
Center-to-corner zone ratio *390%
LensPowered zoom (throw ratio 1.36–2.10:1 for supplied lens), powered focus
Lens shift -> Vertical(from center of screen)　±60 % (with ET-C1W400/W500/S600/T700), ±50 % (with ET-C1W300/U100)
Lens shift -> Horizontal(from center of screen)　±29 % (with ET-C1W400/W500/S600/T700), ±23 % (with ET-C1W300/U100)
Keystone correction rangeVertical: ±40 ° (±5 ° with ET-C1U100; ±10 ° with ET-C1W300; ±16 ° with ET-C1W400; ±22 ° with ET-C1W500)
InstallationCeiling/floor, front/rear, free 360-degree installation
Terminals -> HDMI™ INHDMITM x 2 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals -> DisplayPort™ INDisplayPortTM x 1 (Deep Color, compatible with HDCP 2.3, 4K/60p signal input)
Terminals -> MULTI PROJECTOR SYNC INBNC x 1
Terminals -> MULTI PROJECTOR SYNC OUTBNC x 1
Terminals -> SERIAL IND-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals -> SERIAL OUTD-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals -> REMOTE 1 INM3 stereo mini-jack x 1 for wired remote control
Terminals -> REMOTE 1 OUTM3 stereo mini-jack x 1 for link control (for wired remote control)
Terminals -> REMOTE 2 IND-sub 9-pin (female) x 1 for external control (parallel)
Terminals -> LANRJ-45 x 1 for network connection, PJLinkTM (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Terminals -> DC OUTUSB Type A x 1 (for power supply, DC 5 V, 2 A)
Terminals -> USB TYPE AUSB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module/USB memory
Terminals -> SLOTOpen slot for function boards, Intel® SDM standard-compatible
Protocol versionsIPv4, IPv6*5
Power supplyAC 100–240 V, 50/60 Hz
Maximum power consumption *9870 W (8.8–3.7 A) (880 VA)(Power consumption is 840 W at AC 200–240 V)
On-mode power consumption(Operating mode) -> Normal *9[NORMAL]725 W (AC 100–120 V), 695 W (AC 200–240 V)
On-mode power consumption(Operating mode) -> Eco *9[ECO]565 W (AC 100–120 V), 545 W (AC 200–240 V)
On-mode power consumption(Operating mode) -> Quiet *9[QUIET]555 W (AC 100–120 V), 535 W (AC 200–240 V)
Cabinet materialsMolded plastic
FilterNo
Operation noise -> Normal *336 dB[NORMAL]
Operation noise -> Eco *336 dB[ECO]
Operation noise -> Quiet *333 dB[QUIET]
Dimensions (W x H x D)PT-REQ10: 498 x 212 x 648 mm (19 19/32˝ x 8 11/32˝ x 25 1/2˝) (With feet at shortest position)PT-REQ10L: 498 x 212 x 538 mm (19 19/32˝ x 8 11/32˝ x 21 3/16˝) (With feet at shortest position)
Dimensions (W x H x D) -> Width (not including protruding parts)498 mm (19 19/32˝)
Dimensions -> Width (including protruding parts)498 mm (19 19/32")
Dimensions -> Height (including protruding parts)212 mm (8 11/32˝)
Dimensions -> Depth (not including protruding parts)538 mm (21 3/16˝ )
Dimensions -> Depth (including lens)648 mm (25 1/2˝)
Weight [kg] *10PT-REQ10: Approx. 28.7 kg (63.27 lbs) (with supplied lens)PT-REQ10L: Approx. 27.0 kg (59.52 lbs) (without lens)
Operating environment -> Operating temperature *110–45 °C (32–113 °F)
bottom of page