Christie DWU15-HS
15,750 lumen, WUXGA, 1DLP laser projector, BoldColor+ technology
Resolution
WUXGA (1920 x 1200)
Illumination type
Laser phosphor with Christie BoldColor+™ technology
Illumination performance (hrs)
20,000 hours to 50%
Scan rates
Horizontal: 15-91kHz Vertical: 24-120Hz
Pixel clock rate
600MHz
Signal inputs
Standard:
- HDMI 2.0b x 2 (HDCP 1.4/2.2) (one on rear panel, one on bottom)
- 3G-SDI x 1 (BNC)
- DP x 1
USB x 1 (Type A)
- HDBaseT (RJ45) x 1
Signals:
- HDTV formats VGA through to WUXGA (1920 x 1200)
- Horizontal & vertical scaling while maintaining aspect ratio (all inputs)
3D inputs
- HDMI 1.4, HDBaseT – frame packed, top/bottom, side-by-side (up to 120Hz output); frame sequential @1080p up to 120Hz
- 3D sync in (BNC) – for genlocking projectors
- 3D sync out (BNC) – for genlocking projectors, or controlling emitter or polarizer
- Active shuttered and passive polarized stereoscopic 3D
Signal outputs
- 3GSDI x 1 (BNC)
- HDMI x 1 (HDMI out)
Control and networking
- HDBaseT (RJ45 x 1)
- RJ45 x 1 (Ethernet Control over wired network connection)
- RS232 x 1
- Built-in backlit keypad
- IR Remote
- Remote in: 3.5mm stereo female (provides serial communications and power)
- Loop out available for daisy chaining
- DC JACK 12VDC, 200 mA
Warping and blending
Standard:
- Christie Twist
Optional:
- Christie Twist™ Premium and Twist Pro
- Christie Mystique™ automated camera-based alignment
Lens mount
- Boresight adjustable
- Motorized horizontal and vertical lens offset (memory available)
- Motorized zoom and focus adjustment (memory available for full ILS lenses)
Lens options
Zoom/focus memory:
- 0.38:1 UST lens
- 1.2-1.5:1 zoom lens
1.5-2.0:1 zoom lens
- 2.0-4.0:1 zoom lens
- 4.0-7.0:1 zoom lens
- 7.2-10.8 zoom lens
No zoom/focus memory:
- 0.65-0.75 zoom lens
- 0.84-1.02:1 zoom lens
- 1.02-1.36:1 zoom lens
offsets for 0.38:1 UST lens
+100/-55% Vertical
+4/-28% Horizontal
offsets for 0.84-1.02:1
+108/-74% Vertical
+29/-42% Horizontal
offsets for 1.02:1-1.36:1
+124/-98% Vertical
+40/-49% Horizontal
offsets for full ILS lenses
±140% Vertical
±50% Horizontal
Power requirements
Operating voltage:
- Normal mode: 100-240 VAC @ 50/60Hz
Power consumption:
- Normal mode: 1030W
- Eco1 mode: 824W
- Eco2 mode: 515W
Operating current:
- Normal mode: 5.5A (200-240 VAC), 10A (110 VAC)
Dissipation
@110V:
- Normal mode: 3242 BTU/hr
- Eco mode: 2532 BTU/hr
- Eco2 mode: 1617 BTU/hr
@220V:
- Normal mode: 3071 BTU/hr
- Eco mode: 2474 BTU/hr
- Eco2 mode: 1590 BTU/hr
Audible noise
- Standard mode: 38dBA, Eco2 mode: 35dBA (2x wheel speed)
- Standard mode: 39dBA, Eco2 mode: 37dBA (3x wheel speed)
Dimensions (L x W x H)
26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet
Weight
- 91.5lb (41.6kg)
Shipping dimensions (L x W x H)
37.99 x 31.30 x 14.37" (965 x 795 x 365mm)
Shipping Weight
117.7lbs (53.3kg)
Operating environment
- Temp: 0 to 40° C (32 to 104° F)
- Humidity: 10 - 85% non-condensing
Regulatory
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
Directives: RoHS REACH WEEE
- Contact Christie for timing of certifications: UL/CSA/IEC 60950-1
- FCC Class A cTUVus CE FDA CCC KC PSE EAC BIS VCCI RCM Mexico BSMI
Limited warranty
- Five years parts and labor on the projector
- Five years or 20,000 hours parts and labor on the illumination system*
- Contact an authorized Christie representative for full details of our limited warranty
- *Please reference the Christie Standard Limited Warranty document for details
Accessories
Standard:
- IR remote w/ wired remote jack (wire not included)
- AC line cord for projector
- Product Safety Guide
Optional:
- Christie One Mount Plus (140-117100-XX)
- One Mount Extender Rod (121-125109-XX)
- One Mount Rigging Kit (used with One Mount, One Mount Plus Extender Rod) (121-126100-XX)
- Christie One Rigging Frame (140-113106-XX)
- Fog Filter with Frame (003-005714-XX)
- Fog Filter module (003-005715-XX)


















